Corian was introduced in 1967, and is the original Solid Surface material. Available in over 100 colours.
Solid, homogeneous, and non-porous - Corian ® is the same all the way through it's thickness. It will not delaminate or rot under pressure. If you put Corian ® in a bucket of water for 2 years, there would be no change, it does not absorb liquid.
It will not stain, tests have yet to find a substance found in kitchens or bathrooms that can stain Corian ®.
Corian ® will not harbour germs either. It's warm and inviting to the touch since the material takes it's temperature from the room it is in.
Corian ® is Excellent at resisting Impacts, resisting everyday knocks. In the event of damage however, colour matches are sent with every order so that repairs can be easily made.
It's inconspicuous, unobtrusive, and the joints are seamless.
Corian ® can be formed into Any design.
| ||||
The selection below includes the 14 *NEW for 2008* Collection
Including the Rocky, Illumination, Forrest, & Camargue Series.
* 5 colours in the Translucent Solids Range (not suitable for worktops) ...
(Glacier Ice – Mint Ice – Lime Ice – Blueberry Ice – Strawberry Ice).
Cut-Outs for sinks and hobs are also available, at extra cost.
Hob cut-outs in particular must always be factory fabricated, as the Corian ®must be set on an MDF sub-frame,which is set back, each corner strengthened and reflective insulation tape applied to all edges.
Pan Rests consist of 10mm bars placed in 5mm deep grooves in the worksurface. The bars are available in stainless steel or brass, in lengths of 200, 300 and 400mm lengths. These are available as an extra over price quoted for six pan rests, but the customer can request more or less as required.
The selection below includes Corian sinks and Astracast Sinks.
See measurements below.
Most Corian sinks are available in the following colours, please enquire for further details.
Square Upstand - This is achieved by gluing a flat sheet of Corian® to a worktop using Corian® adhesive.
Coved Upstand - this is achieved by rebating the rear edge of a worktop, inserting another piece of Corian® and matching to a round Shape.
Tel & Fax : 07092 899610
.
.
.
.
